7 Reasons To Love THE BRAND NEW Roofing Roof

0 Comments

The best flat roof roofing material is undoubtedly an individual sheet of rubber custom made for weather-proofing flat roofs, such as Firestone’s EPDM product.

This is laid directly onto roof boarding, itself supported by the roof rafters and nagging. Insulating material is normally laid in the space between the two, and if you are renewing your flat roof anyway you might as well take the opportunity of renewing that simultaneously.

This will almost certainly function as recommendation you obtain from any reputable builder or roofer advising you on replacing your existing flat roof.

Until recently the most used material for a new flat roof was bituminous felt laid in three layers, the first layer nailed down and top of the two bonded to the main one beneath with mastic bitumen. With regards to the material used, this could mean heating a good bitumen-based compound to create it liquid, and then pouring it onto the underlying felt and spreading it evenly on the whole section of the roof.

Then you had to hold back for the compound to cool before applying the next layer, and at the end spreading a layer of stone chippings over the roof and bonding it with a chipping compound, this being to reflect natural sunlight preventing the felt and bitumen degrading quickly.

This was altogether a rather messy, complicated and time-consuming job best left to the professionals. In addition, there were several stages where it had been very easy to fail to make the roof weather-proof, e.g. where in fact the edge of the felt met the existing tile or slate roofing of the pitch roof.

Lafayette Roofing In addition, if, or rather when, there developed a leak in the flat roof, it will be very difficult and messy to determine wherever the rain was getting back in. Seldom would the manifestation of the leak on the ceiling of the room below be directly below the source of it. Water could get by way of a weakness in the bitumen felt and travel along a rafter before descending to the ceiling board below.

The brand new generation of rubber-based flat roofing systems are far superior. For those who have reasonable DIY abilities then you can probably do it yourself, with one other person to assist. You can easily find a local supplier of rubber flat roof roofing material online, and the existing price is around �6.65 per square metre.

Most suppliers slice the material to the exact shape and size that you require so are there no unnecessary joins, meaning no weaknesses and an exceptionally long-lasting, leak-proof roof.

The vital area of the whole process is to ensure that there are no gaps between your rubber roof and any existing pitch roof where rain may penetrate. To ensure you can find no problems it is vital to run the rubber material up and under the tiles or slates of the adjoining pitch roof in order that any rain dripping from the lower-most row falls onto the rubber, without possibility of it over-lapping the edge and getting underneath the pitch roof.

Also, make sure that the prevailing slope of the flat roof towards the guttering or other means of water escape is maintained. The rubber is merely glued onto the roof boards and sealed where appropriate with metal brackets or bitumen in such a way that rain penetration is impossible. Mind that the glue covers the whole of the underneath of the rubber in order to avoid bumps in the top which could obstruct the drainage of the water away.

Rubber roofs have been proven to last for more than 50 years under all weathers, so that it really is the only real flat roof roofing material that you should consider when deciding on a fresh flat roof.

Leave a Reply

Your email address will not be published.

slot88 maxwin

SLOT GACOR

SBOBET

เว็บตรง

เว็บตรงสล็อต

娛樂城體驗金

เว็บสล็อต ยอดนิยมอันดับ

Slot Gacor

togel

mpogtaid

daftar teslatoto

Slot88 Gacor